APLIKASI BAHAN BANGUNAN “BAMBU” PADA TEMPAT SANTAI (GAZEBO DAN DEGO-DEGO) MAHASISWA PROGRAM VOKASI UNG
DOI:
https://doi.org/10.37971/radial.v11i2.551Keywords:
Bamboo, Construction Materials, Gazebo, Project-Based Learning, Sustainable ConstructionAbstract
This study aims to examine the application of bamboo building materials in the construction of gazebos and relaxation areas (dego-dego) as an implementation of project-based learning for students in the UNG Vocational Program. The research method uses a project-based learning (PBL) approach with stages of preparation, data collection through comparative studies, material delivery by lecturers, and evaluation of bamboo construction products. Activities included field visits to brick and concrete block factories, the creation of concrete models with various mixtures, and the practical application of gazebo construction using bamboo, wood, thatched roofs, palm fiber ropes, and other supporting materials. The results of the study showed a 70% success rate in students' mastery of knowledge and practical skills in applying bamboo as a sustainable construction material. Bamboo has been proven to have optimal structural characteristics as a lightweight, hollow material with bracing properties that strengthen construction. Despite group coordination challenges, this research has made an important contribution to developing an understanding of environmentally friendly construction material diversification and has laid the foundation for the development of sustainable material innovations in the future.
References
Annisa Nabila Arrizqi, Hermawan, H., & Wiwit Dodi Prasetyo. (2023). Perancangan Gazebo dengan Software 3D untuk Mendukung Perintisan Wisata Kelurahan Terong, Bantul. Servis : Jurnal Pengabdian dan Layanan kepada Masyarakat, 2(1), 36–42. https://doi.org/10.58641/servis.v2i1.61
Awang Caesario, M., & Priyanto, B. (2023). Metode Pelaksanaan Konstruksi Pekerjaan Struktur atas pada Proyek Pembangunan Gedung 10 Lantai. Jurnal Sosial Teknologi, 3(4), 359–368. https://doi.org/10.59188/jurnalsostech.v3i4.737
Bock, T. (2015). The future of construction automation: Technological disruption and the upcoming ubiquity of robotics. Automation in Construction, 59, 113–121. https://doi.org/10.1016/j.autcon.2015.07.022
Dewi, S. (2020). PROSES KONTRUKSI PENGETAHUAN SISWA DITINJAU DARI GAYA KOGNITIF FIELD DEPENDENT PADA PELAJARAN MATEMATIKA DI SMA NEGERI 8 KOTA JAMBI. PHI: Jurnal Pendidikan Matematika, 4(1), 55. https://doi.org/10.33087/phi.v4i1.87
Fajrillah. (2018). STUDI METODE PENELITIAN CAMPURAN UNTUK MENGHASILKAN SOLUSI DAN INOVASI DI BIDANG SI/TI AGAR DAPAT MENINGKATKAN DAYA SAING. Open Science Framework. https://doi.org/10.31219/osf.io/e5xbf
Ferry Ajiansyah. (2022). Metode Pelaksanaan Konstruksi Baja pada Pekerjaan Proyek Pembangunan Gedung Budaya Kabupaten Lampung Barat. Seminar Nasional Insinyur Profesional (SNIP), 2(1). https://doi.org/10.23960/snip.v2i1.59
Frans, R., & Thioritz, S. (2022). Optimasi Penampang Bambu Pada Struktur Rangka Batang Bidang Dengan Menggunakan Binary Bat Algorithm. JUTEKS : Jurnal Teknik Sipil, 7(2), 74. https://doi.org/10.32511/juteks.v7i2.869
García De Soto, B., Agustí-Juan, I., Hunhevicz, J., Joss, S., Graser, K., Habert, G., & Adey, B. T. (2018). Productivity of digital fabrication in construction: Cost and time analysis of a robotically built wall. Automation in Construction, 92, 297–311. https://doi.org/10.1016/j.autcon.2018.04.004
Khin, S., & Ho, T. C. (2019). Digital technology, digital capability and organizational performance: A mediating role of digital innovation. International Journal of Innovation Science, 11(2), 177–195. https://doi.org/10.1108/IJIS-08-2018-0083
Liu, K., Meng, Q., Kong, Q., & Zhang, X. (2022). Review on the Developments of Structure, Construction Automation, and Monitoring of Intelligent Construction. Buildings, 12(11), 1890. https://doi.org/10.3390/buildings12111890
Mansyah, K. (2023). Kajian Material Ramah Lingkungan dalam Merespon Konsep Lingkungan pada Health, Safety, and Environment (HSE). Jurnal Rekayasa Teknik dan Teknologi, 7(2), 55–59. https://doi.org/10.51179/rkt.v7i2.2031
Maskuriy, R., Selamat, A., Ali, K. N., Maresova, P., & Krejcar, O. (2019). Industry 4.0 for the Construction Industry—How Ready Is the Industry? Applied Sciences, 9(14), 2819. https://doi.org/10.3390/app9142819
Noverma, N., Yusrianti, Y., & Hapsari, O. E. (2020). Pengaruh Susunan Bambu terhadap Peningkatan Kekuatan dan Kekakuan Elemen Struktur Bangunan. Jurnal Teknik Sipil, 15(1), 42–49. https://doi.org/10.24002/jts.v15i1.3150
Sugiartha, I. W., Rofaida, A., Handayani, T., & Saptaningtyas, R. S. (2021). KUAT TEKAN DAN KUAT GESER BAMBU KOMPOSIT SETEMPAT BERPENGISI PLASTIK DAN SERBUK GERGAJI KAYU: Compressive Strength and Shear Strength of Local Composite Bamboo Filled Plastic and Wood Sawdust. Spektrum Sipil, 8(1), 27–31. https://doi.org/10.29303/spektrum.v8i1.194
Suriani, E. (2017). Bambu Sebagai Alternatif Penerapan Material Ekologis: Potensi dan Tantangannya. EMARA: Indonesian Journal of Architecture, 3(1), 33–42. https://doi.org/10.29080/emara.v3i1.138
Tri Prabowo, E., Kadri, M. K., Mustofa, U., & Pratama, M. I. (2023). Arahan Pengelolaan Berdasarkan Tipologi dan Pemanfaatan Pemakaman di Kelurahan Karang Joang. COMPACT: Spatial Development Journal, 2(3), 29–37. https://doi.org/10.35718/compact.v2i3.1056
Utama, A. H. (2021). Model Desain Penyelenggaraan Pendidikan Inklusif. Edudikara: Jurnal Pendidikan dan Pembelajaran, 6(3). https://doi.org/10.32585/edudikara.v6i3.244
Utomo, D. S. (2022). Pengaruh model pembelajaran berbasis proyek terhadap kemampuan membuat produk daur ulang siswa SMA. Jurnal Pendidikan Geografi, 27(1), 63–72. https://doi.org/10.17977/um017v27i12021p63-72
Windayati, H. D. (2023). ANALISISA CAMPURAN GREEN MATERIAL SEBAGAI ALTERNATIF PEMBUATAN BATA RINGAN UNTUK PEKERJAAN DINDING. INFOMANPRO, 12(1), 31–40. https://doi.org/10.36040/infomanpro.v12i1.6499
Wulandari, F., Habibi, & Amin, R. (2023). Sifat Fisika dan Mekanika Papan Laminasi Bambu Petung (Dendrocalamus Asper) dengan Susunan Bilah Ke Arah Lebar. HUTAN TROPIKA, 18(1), 109–116. https://doi.org/10.36873/jht.v18i1.9027
